Konig Backbone Wheels for Hyundai IONIQ 5

SOLD INDIVIDUALLY. Put in a quantity of 4 for a complete set. For help selecting the right wheels, check out our Wheels & Tires Buyer's Guide.

The Konig Backbone wheels are an aggressive, 6 spoke design. Featuring a 6 spokes with small dimples towards the center. This helps break up the smooth design and give it more detail. These wheels are sure to turn heads. Using Flow Forming Technology, Konig was able to reduce the overall weight of each wheel, while increasing tensile strength vs. standard cast wheels.

Key Features:

• Offered in 15, 16, 17 and 18 inch sizes.
• Available in a Matte Black finishes.
• Uses Konig's Flow Forming Technology, which results in a stronger, lighter, and more durable wheel when compared to a traditional cast design.

Konig Backbone Wheel Hardware Information:

• Center Caps: Included
• Lug Nuts: Accepts small diameter "tuner style" aftermarket lug nuts only (sold separately).
• TPMS: Direct fit compatibility with most all factory TPMS (Tire Pressure Monitoring System) sensors.
• Hubcentric Rings: Not necessary if installed properly. The tapered aftermarket lug nuts this wheel accepts will automatically center the wheel if installed correctly (tighten each lug nut using a criss-cross pattern, usually to 80 lb-ft of torque each, and re-tighten each lug nut after about 100 miles of driving).